Pax 3 Tips and Tricks–NamasteVaporizers.com

Top 5 tips to follow for your PAX 3 Vaporizer

The Pax 3 is one of the best performing portable vaporizers on the market today, but there are plenty of tips and tricks that can take each session to the next level.

There are numerous tips and tricks you can use to ensure the optimal performance of your Pax 3 vaporizer in every session. From the way that you load the oven to taking advantage of the convenient heat modes, all of these little tricks make a huge difference.

This guide covers all the best Pax 3 tips and tricks that can elevate your experience, most of which you probably haven’t seen before!

1. Grind Fine and Pack Tight

Since the Pax has a conduction heating system that relies on the material directly touching the heat source, these pax 3 packing tips will be useful. This vaporizer works best with a super fine grind that is packed tightly into the chamber. The heating chamber of the Pax 3 vaporizer can fit up to 0.35 grams of herb. So, what if you want to enjoy a smaller amount of herb? Pax 3 has you covered with their half-pack oven lid that allows for a tighter pack for a smaller amount. As for concentrates, one pod can hold about 10-20 milligrams.

2. Download the App

The Pax 3 app gives you total control over temperature settings and spectrum. Just enable the bluetooth on your phone and open the app for a whole world full of extras. This app also allows you to change the name of your device, access your security lock, play games, and get the latest updates from Pax.

3. Try Out the Different Modes

The Pax 3 vaporizer has a few different modes that cater to many different preferences. Firstly, this vaporizer has a “stealth mode” for those situations where you're out and about and need to stay under the radar. This mode can be activated to dim the LED lights, produce less vapor while still maintaining the same perfect quality, and will speed up the cooldown time. To activate this mode, simply shake the device as it displays the start-up pattern.

The rest of the modes can be found in the app on your phone that is connected via bluetooth. The “boost mode” will keep the oven hotter for a longer amount of time with less auto cooling which is great for quicker sessions, denser vapor, and when using a water pipe. There is also an “efficiency mode” which will heat the oven throughout the session and a “flavor mode” that will only heat herbs when you are drawing from the vaporizer which allows for enhanced flavor and smoothness.

4. Take Easy Draws

A slow and easy draw is the key to optimal performance in every single session. When using vaporizers with a conduction heating system, you can overwhelm the heater and get lower quality vapor if you pull too hard.

The best Pax 3 user tip is to start with a gentle cigar-like puff, almost like you are sipping from a hot drink. A draw that lasts about 2-3 seconds should be enough to clear all vapor from the chamber. Always remember to give Pax a few seconds in between your next draw to heat your material again and create more vapor.

5. Keep Cleaned and Maintained

The most important thing you need to do to keep your Pax 3 performing at its absolute best is to keep it well maintained and clean. For starters, the chamber should at least be brushed out after every session if not fully cleaned. The need for deeper cleanings will depend on your frequency of use but generally about twice a month. During your deep cleaning, don't forget the vapor path. Keeping the vapor path clean minimizes the potential for a dirty pathway, lowers draw resistance, and keeps vapor tasty.

Final Thoughts

The Pax 3 is an incredibly innovative vaporizer that offers users so much in every single session and these tips and tricks will only make every sesh even better. So keep these in mind during your next session and elevate your vaping experience with the Pax 3.